New Design and Innovative Speicalized Vehicle Crane for Trucks Cargos Loading

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: JZDJ001
• Transport Package: Wooden Box with Sponge Inside
• Specification: 2500mm*650mm*400mm
• Trademark: Selmy
• Origin: Foshan
• HS Code: 04756294
• Production Capacity: 800 Set Per Year

Product Description

New Design And Innovative Speicalized Vehicle Crane For Trucks Cargos Loading 

Product Description 

Introduction to the Functions of the Selmy Brand Vehicle-mounted Crane
The Selmy vehicle-mounted crane features an extremely high lifting height, small footprint, large operating space, the ability to extend 1-4 meters from the vehicle for loading and unloading, and high efficiency in loading and unloading.
The Selmy i brand vehicle-mounted crane has obtained a patent for invention from the National Intellectual Property Administration. It is installed on the top of the vehicle, and it has the following six major advantages:
1. Small footprint, high lifting height, large working range. (Only occupying about 25 cm of the vehicle roof)
2. The crane can extend to 1-4 meters outside the vehicle through folding tracks for loading and unloading.
3. After conversion, the vehicle's own battery can meet the power supply requirements.
4. Reduces safety hazards, one vehicle, one person, one remote control, can complete the loading and unloading.
5. Does not change the vehicle's appearance, high efficiency, compared with traditional loading and unloading, can save 50%-80% of time.
6. It is not restricted by environment or site conditions, and cargo loading and unloading can be carried out at any time and anywhere.
II. Operating Procedures
1. Turn on the power switch on the inverter.
2. Open the door and extend the folding arm. Confirm that the folding arm fixing pin has been inserted.
3. Open the lifting hook fixing pin, click the remote control start button, the crane is in operation, the working lighting lamp lights up.
4. Operate the crane through the remote control for the lifting operation.
5. After completing the task, drive the crane into the fixed position and insert the fixing pin.
6. Fold the folding arm and fix it.
7. Close the crane through the remote control, the lighting lamp goes out.
8. Turn off the power switch of the inverter.
III. Structural Characteristics and Working Principle
This series of products consist of a bridge frame, lifting mechanism, trolley running, main trolley running, and electrical systems. The lifting mechanism uses steel wire rope or chain as the lifting mechanism.
(1) Main Beam
This series uses a C-shaped steel beam structure. The main beam is connected to the end beam with high-strength bolts. To prevent the running mechanism from reaching the extreme position, buffer blocks are set on both sides of the main beam.
(2) Lifting Mechanism
The lifting mechanism adopts a three-in-one drive motor and chain hoist system combination. Its structural feature is that the lifting mechanism is fixed at one end of the main beam, increasing the lifting running space of the hook.
(3) Main Trolley
The main trolley running mechanism adopts four-wheel running and two-wheel drive. The motor is a three-in-one micro parallel shaft motor, and the number of driving wheels is half of the total number of wheels.
IV. Electrical System
1. Overview
The operation of each mechanism of the crane is controlled by ground personnel through remote control. The power supply of this mini crane can be selected from 380V and 220V voltages. It can also be installed on the vehicle for loading and unloading goods by converting the DC 24V and DC 12V power sources on the vehicle through a converter.
When the remote control fails or is damaged and cannot be used, the randomly equipped wired control handle can be plugged into the aviation plug of the crane's electrical box and tightened to restart and can be temporarily used.
2. Operating Conditions
Electrical control equipment operating conditions:
(1) Below 2000 meters of altitude;
(2) The ambient air temperature does not exceed +45ºC and is not lower than -25ºC;
(3) Grid fluctuation is within ±10%;
(4) Relative humidity does not exceed 85%;
(5) In a place without rain, snow or water vapor.
If the actual operating conditions do not conform to the above, please specify when placing an order.
3. Electrical Equipment
The operation of each mechanism of the crane is controlled by remote control and handle.
This crane adopts a centralized control method, which is used for overload protection of AC motors on the crane, power loss, safety, and limit protection of each mechanism. It cooperates with the remote control and operation handle to control the operation of each motor, and also provides power, control, and lighting circuit power.
4. Limit and Safety Switches The traveling and lifting mechanisms of the crane are equipped with limit switches to restrict the movement range of each mechanism. When the limit switches are disconnected, the corresponding circuits are cut off and the mechanisms stop operating. After the limit switches take effect and the operation stops, the mechanisms can only operate in the opposite direction, thereby ensuring safety.
V. Random Documents
1. Crane Certificate of Conformity;
2. Crane Operating Instructions;
3. Packing List;
4. Equipment General Layout, Main Load-bearing Components Diagrams;
5. Electrical Schematic Diagrams, Wiring Diagrams;
6. Other relevant technical documents as requested by the customer or agreed upon before delivery;
7. Relevant provisions stipulated in national laws, regulations, rules, procedures, norms, standards, etc., which must be submitted by the manufacturing unit to the user unit.

Operation Parameters Table
 

Model Name	Parameters
Speed For Front And Back	8m
Speed For Left And Right	8m
Speed For Up And Down	4m
Left Minimum Distance	450mm
Right Minimum distance	500mm
The thickness of the crane	150mm
Hook Height	10mm
Folding arm length	The interior width is -300mm

 

 

Hardware Parameter Table
 

Model Name	Specification
Post	40*60*5 Rectangular Tube
Tracks	60*100*4 Rectangular Tube
Support Post	60*80*5 Rectangular Tube
Folding arm	60*100*4 Rectangular Tube
Crane	1t Main Beam 150*150*6 Rectangular Tube
Automatic reel reel	2*2.5*10m
Cable	2*2.5²
Inverter	DC24V-6000W
External electrical box	Length: 500mm * Width: 300mm * Height: 500mm

Certifications 
Company Profile 

Guangdong Selmy Intelligent Equipment Technology Co;Ltd was founded in 2016,its predecessor is Foshan Selmy Lifting Machinery Technology Co;Ltd ,registered capital of 50 million RMB ,headquartered in Foshan City ,Guangdong Province ,is the first domestic loading machine R&D AND production enterprises ,can tailor multi-scene loading solutions ,customers cover the world's top 500 ,fire ,emergency ,central enterprises ,State-owned enterprises ,listed companies and another major fields ,have developed into the most matured technology of container handling truck integration solution providers.To provide quality equipment and services for the whole country and the world .
The company's main products are :docking threes dimensional warehouse automatic loading sysetm ,container overall push loading machine ,container boom loader ,container heavy loading machine ,all kinds of truck special crane and other products .Our company's products and services have been praised by customers ,for customers to improve 90% of the work efficiencey ,save 80% of labor costs ,maximize the reduction of security risks.The company has won more than 60 patent certificates issued by the State Intellectual Property Office ,including more than 40 invention patent certificates  and utility model patent certificates ,and the rate of 5 to 8 patents per year .At present ,we are the intelligent equipment enterprise with the most matured ,the most widely used fields loading and unloading equipment technology ,and with the most successful cases of intelligent equipment enterprise .

We are willing to cooperate with all walks of life,the customers from all over the world and make acheivements !

Our Advantages :

1.We have the rich experience for the design and the production of the container loading machines .
2.We have been in the field on the container loading machines and lifting machines field for more than 15 years .
3.We have the most professional design and production team to provide the best solution for you .
4.Keep innovating ,we are the leader of the industry .
5.Centered on creating value for customers 
6. Make customers satisfied ,Make our customers confident .
7.Independetn research and development ,striving for excellence .
8.Professional customaization ,helping cusotmers reduce labor costs .Excellent quality ,high quality production is the best guarantee for maintaning customers .

 Packaging & Shipping 
FAQ

Q:Are you a manufacturer of the container loading machines ,truck mounted cranes ,dual track vehicle mounted cranes ?
A:Yes ,we are a factory ,our company have passed ISO and CE,SGS certications ,products have been exported to more than 20 countries and regions .

Q:How is your after-sales service of the cranes machine ?
A:We have a number of after-sales services that provide 24 hour technical support via phone ,whatsapp ,videos and email .

Q:What is your lead time of the customization products ?
A: It takes 40~60 days upoon the receipt of full payment ,10 days for the normal standard products .

Q:Can you accept customization ?
A:Sure ,we provide the best solution for the container loading machines and the truck mounted cranes .

Q: Is it convenient to visit your fatory and see the products ?
A:Welcome to our factory for a visit .